|




Downloads
| |
Privacy Fence Installations
 
This lady (A current KRC client) just spent $5,000 on a new pool
and had limited funds, however the local building ordinance demanded she install
an 80 foot privacy fence. ...KRC built this one for $100.00 plus
materials.
This fence was a quick install of pre-fab privacy fencing performed on an
emergency request. The panel sections were relatively inexpensive and solved the
immediate problem with the city ordinance.
Key Benefits
- Low cost: Total project was approximately $250.00
- Quick fix: One day to set posts and allow concrete to cure and one
day to hang the pre-fab panels, gate, and latches. (Total time: 2 days)
- Highly increased outdoor privacy and security, extremely visible upgrade
to the property.
Pricing: This project was a discount rate and an
emergency response to an existing KRC client. Cost and response were exceptional
due to the magnitude of construction and expense ongoing for this client.
Typical pricing under normal conditions for this type of privacy fence is
approximately $25.00 per every 8 ft section including posts, gates, and any
hardware.
Patio and integrated pool decks
 
This design specifies a 14' X 16' laterally planked patio deck using 5/4
radius edge treated deck planking and treated structural support. The
patio deck is integrated with a 6' X 8' elevated pool deck, comprised of the
same materials and hardware. Total materials cost was $987.00 for the lumber and
hardware. The design itself was necessary and, therefore, was not charged
to this client and remains the property of KRC. (The design for this and any KRC
project is for sale by copy or with exclusive ownership rights) The "boxed"
stairway construction provides for stability, strength, and longevity,
integrating both decks effectively and eliminates muddy feet after a swim or mud
in the pool filters on the way in.
 
The completed deck project, built to outlast the guarantee, will provide
utility for many years. Set 31" deep in concrete (per IRC regulations) and
girder supported joists insure that our decks don't flex !
Also notice the added concealment for the pump and filter assembly.
Key Benefits:
- Low cost: Total project cost was under $1,500.00 (You
cannot buy a pre-designed, prefabricated kit for less !
- Quick Assembly and readily available materials:
Project assembly time was a matter of a few days for each deck level.
Materials were "shopped" for lowest cost possible. (Personally hand picked
lumber and delivered by KRC)
- Functionality: the deck is providing safe and appropriate
egress to and from the pool, as well as cover protection for the pump assembly
from hail, sunlight and windblown debris. The provision of a vantage point
from which to observe swimmers was crucial for this client as small children
would need supervision. The upper deck overhangs and is open at the pool side
providing quick access to the pool. We suggest adding a gate to the
stairway providing additional safety.
- Quality: This client has agreed to provide a reference for
KRC and is quite pleased with her new deck which is guaranteed for five years
under KRC's company policy regarding workmanship. Basically, she has five
years to discover any defects.
- Follow up: To date Mrs. Peterson has provided KRC with
several project references which resulted in successful contracts and has
repeatedly contracted more projects with our service. By doing so, she has
secured our discount rates for any future projects.
| Service Description
(examples) |
SKU # |
Service Fee |
| Decking: Standard 5/4 X 1" treated planking |
STDK01 |
$9.50/sq. yd |
| Posts: Installed to code and spec. |
FPST01 |
$15.00 ea |
| Structural Framing: Layout, posts, Band boards,
joists, girders, stabilizers, and hardware (ie: hangers, lags, etc.) |
STR-01 |
$11.50/sq. yd. |
| Structural Design: 14'X16'w/ledger and full band (C) |
CDZ001 |
$25.00 |
| Structural Design: Boxed 7-tread stairway
w/handrail (C) |
CDZ002 |
$25.00 |
| Handrail: Std. 2"X2" spindles, balusters, and top
plates |
HNR01 |
$12.00/Lin. ft |
| Fence Panels: Fabricated on site |
FPNL01 |
$35.00 ea |
| Fence Panels: Installed per MFG recommendations |
FPNL02 |
$10.00 ea |
| Preparation: grading and fence-line layout |
FLPR01 |
$1.00/Lin. ft |
|